Business

Solids Control Equipment and Services ¨C KOSUN

Published

8 years ago

September 5, 2017

Solids control, or solids control equipment by Kosun – top solids and liquid separation service provider and stage 3-5 precision solids control system manufacturer in China, serving clients around the world for 25 years.

Solids Control Equipment-KOSUN
-DC Series Decanter Centrifuge: is used to separate suspended solids ¡Ý2¦Ìm in diameter and treat the drilling mud and fluids. It is especially effective when used in oilfield service industry, industrial service industry and especially in environmentally sensitive areas. This type of centrifuge is high in recovery rate, effective in solids control and remarkable in the reduction of cost spent on drilling mud resupplying and management. It is a very sophisticated dynamic balancing machine, able to operate stably with the whirling speed ranging from 0 to 3900 and generate centrifugal force of 3000G.
-D Series Decanter Centrifuge: is used in separating suspension of solids phase with particle ¡Ý2¦Ìm in diameter, and can be used at Environmental Protection Industry, Chemical Industry, Food Industry, Pharmaceutical Industry,and many other related industries, and can the replacement of GEA westfalia centrifuges or Alfa Laval centrifuge.

-Desander: In the 2nd stage of solids control for drilling fluids, desander makes separations between 45 and 75 ¦Ìm.
-Desilter: In the 3rd stage of solids control for drilling mud, the Desilter by Kosun makes separations between 15 and 45 ¦Ìm.
-Diesel tank: is the specialized tank used to provide and store fuel for diesel engine and generator, which mainly consists of storage tank, self-priming centrifugal oil pump, filter, flowmeter, explosion-proof liquid-level switch, liquid level gauge, elevated oil tank & manifold and stainless steel valve.
-Shear Pump: For a quick concoction of high-performance mud, and shorten the time spent on it, so as the and wells’ economic benefits increased, the shear pump by Kosun is performing good.
-Screw Pump: is used to feed drilling fluids to decanter centrifuge since drilling fluids is pushed to proceed along axial direction evenly.
-Mud Agitator: is used to agitate and mix the drilling mud to prevent solids particles from depositing in the circulating tank and to stabilize the performance of drilling fluids.
-Mud Gun: is for jets drilling fluids with high pressure inside mud tanks.
-Balanced Elliptical Motion Shaker: In drilling top-hole sections where heavy, high-volume solids, it canremove viscous solids and eliminate larger particles in drilling fluids.
-Centrifugal Pump: can be used as feeding pump for desander, desilter, or as mixing pump for jet mud mixer.

-Jet Mud Mixer: is mainly applicated in concoct the drilling fluids and to change its density and viscosity.
-Water tank: can be widely used in petrochemical industry, food industry and industrial water.
-Submersible Slurry Pump: is used to pumping of thick oil, oil residue, dirty oil, mud, mortar, running sand and other liquids from the municipal sewerage, so its application industry can be related with many, such as environmental protection, new type building materials, coal washing, municipal projects, thermal power generation, coal gas coking plant, refinery, steel mills, mining, paper making, cement plant or food producting factory.
-Linear Motion Shale Shaker: The shale shaker is the first stage of solids control equipment in drilling purification system. It can remove cuttings above 75 ¦Ìm brought from the drilling well to leave the liquid with smaller particles into the tanks below, which will flow into next grade solids control equipment for further treatment.
-Drilling Fluid Tank: is often rectangle with its base constructed by H-shape steel as the main frame and other building materials, made to be skid mounted after satisfying the strength requirement.
-Hi G dryer: is used to recover cuttings from water-based or oil-based drilling fluids so as to lower the hydraulic proportion than 10% and significantly reduce the cost on waste discharge. It is proved to be particularly effective in recovering the oil-based mud cuttings.
-Drilling Mud Cleaner: Combing desander and desilter, the Drilling mud cleaner by Kosun can be the mud cleaner miswaco replacement now, and good quality mud cleaner is for sale now.In the second or third stage separation equipment for drilling fluids, Drilling fluids mud cleaner by Kosun deals with the mud being treated by the first grade separation equipment.

Solids Control Equipment (2)
Solids Control Services ¨C KOSUN
KOSUN products are typically applied to the following three fields:
(1) Petrochemical field: petroleum solids control equipment and system, zero discharge of drilling mud, and upstream & downstream products of petrochemical industry;
(2) Environmental protection field: centrifuge environmental industry, tailing treatment/ore classification, soil ecological restoration, chemical/parmaceutical/food processing, etc.;
(3)Infrastructure field: HDD, metro tunnel shield construction, pipe gallery laying, diaphragm wall, pile foundation slurry, riverway and lake dredging, etc.
Founded in 1992, Xi¡¯an KOSUN Machinery Co., Ltd. is a state-level high-tech enterprise integrating environmental products R&D, production and sales, general project contracting and environmental management services. KOSUN is committed to the quality policy of ¡°Good Faith, Quality Goods and Transcendence¡± and is based on the Chinese market to provide worldwide users with all kinds of professional solid-liquid separation products and comprehensive treatment services. (Editor:Kosun Lily.Wang)

by Okwum Uchekcukwu

Business

KALCCIMA PROMISES KALABARI ECONOMIC GROWTH, INAUGURATES NEW EXECUTIVES

Published

2 days ago

January 2, 2026

The Tide

The Kalabari Chamber of Commerce, Industry, Mines and Agriculture (KALCCIMA) has formally inaugurated its new executive council at a ceremony marked by optimism, strong institutional backing, and renewed commitment to economic development in Kalabari land.

The inauguration was performed by the National Deputy President of the National Association of Chambers of Commerce,Industry, Mines and Agriculture (NACCIMA), Dr. Emi Membere-Otaji, who charged the new leadership to position KALCCIMA as a catalyst for inclusive growth, enterprise development, and strategic engagement with government and the private sector.

The newly inaugurated officers of KALCCIMA are:

Elder Monima Daminabo (President); Amb. Clement Akanibo (First Deputy President); Boma Kaladokubo (Second Deputy President); Harry Awolayeofori Macmorrison (Executive Secretary/Director-General); Faaye Franklin (Treasurer); Engr. Robinson Success (Financial Secretary); Ibiba Don-Pedro (Public Relations Officer); Princess Nancy Boma Princewill (Organising Secretary); Barr. Idaoyibo Fortune Igbikikuno (Legal Adviser); Abiye George (Welfare Officer).

In his keynote address, Dr. Membere-Otaji congratulated the Exco and emphasized the strategic importance of a vibrant local chamber to regional and national economic growth.

He urged the leadership to align KALCCIMA’s programmes with NACCIMA’s national vision, stressing professionalism, transparency, and innovation in advancing commerce, mining, agriculture, and small and medium-scale enterprises in Kalabari.

“The Chamber must become a rallying point for entrepreneurs, investors, and policymakers. Kalabari has immense economic potential, and KALCCIMA must provide the structure and leadership to unlock it,” he said.

Also speaking, the Chairman of the Board of Trustees, Prince Billy Harry, charged the Exco to lead with integrity, unity, and purpose.

He encouraged them to move beyond ceremonial roles and focus on tangible outcomes that would uplift Kalabari communities, empower youth and women, and attract sustainable investments.

In his acceptance remarks, Elder Daminabo expressed gratitude to NACCIMA, the Board of Trustees, and stakeholders for their confidence in the new leadership.

He assured members that the Exco would prioritize stakeholder engagement, capacity building, and partnerships aimed at stimulating trade, supporting local industries, and promoting agricultural and maritime opportunities unique to the Kalabari axis.

Goodwill messages poured in from notable professionals and stakeholders, including Arc. Eniye Braide, Arc. Danny Sokari George and Ebianga Bestmann, all of whom commended the inauguration and expressed confidence in the capacity of the new Exco to reposition KALCCIMA as a strong voice for economic advocacy and development.

They urged the Chamber to leverage Kalabari’s strategic location, cultural heritage, and human capital to foster entrepreneurship, attract investments, and contribute meaningfully to the economic prosperity of Rivers State and Nigeria at large.

The inauguration ceremony ended on a note of collective resolve, with stakeholders expressing hope that the new leadership would usher in a new era of relevance, impact, and sustainable development for KALCCIMA and the entire Kalabari nation.

By: Opaka Dokubo

Business

NCDMB Begins Nigerian Content Research, Innovation and Technology Challenge

Published

2 days ago

January 2, 2026

The Tide

The Nigerian Content Development and Monitoring Board (NCDMB), in December 2025 commenced the Nigerian Content Research, Innovation and Technology Challenge 2025/2026 edition.

The Board called on interested individuals, research institutions, academia, oil and gas industry suppliers, and members of the public with research innovations, to submit proposals for evaluation and admission into the NCDMB Technology Innovation and Incubation Centre (TIIC), Yenagoa, Bayelsa State.

The Tide learnt that the competition, which seeks to identify and develop new technologies to address specific challenges in the oil and gas industry and its linkage sectors, requires that proposals be in line with approved thematic areas and priority industry challenge, namely, Geological and Geophysical Studies, Local Materials Substitution Studies, Technology Development Studies, Health, Safety and Environmental Studies, Engineering Studies, and Renewable Energy.

For Geological and Geophysical Studies, proposals have to focus on developing solutions related to exploration, big data, and real time logging data processing, while those for Local Materials Substitution Studies have to concentrate on sustainable materials for environmental remediation, materials for development of cryogenic technology for liquefied natural gas (LNG), refinery, and other applications, as well as local materials for ultra-high temperature pressure cementing.

For Technology Development Studies, the NCDMB requires innovation on denationalization technology, application of Internet of Things to exploration and production, and condensate refining technology, while proposals for HSE Studies are expected to deal with carbon capture utilisation and storage technology to reduce greenhouse emission, depollution and produced water management system, and hydrogen production techniques to enhance carbon dioxide capture.

In respect of Engineering Studies, proposals are expected for developing technology solutions for enhanced oil recovery, refinery units technology to improve efficiency, laboratory analytical equipment for experiment and materials testing, and drilling technology, instrumentation, and control systems.

For Renewable Energy, the Board said proposals are expected from solar energy technologies, wind energy solutions, and energy storage systems, such as battery technologies, hydrogen storage, thermal storage, and molten salts.

The NCDMB noted that the proposals, which should not be more than 1,500 words were to be submitted via email address (info@tiic.com.ng) not later than a month from the date of publication were also required to be in the following format: Company/institution name, Thematic area, Title of innovation, Description of innovation, and Objective, vision and mission.

Others are, Team structure, Funding model and budget estimate, Marketing plan, and Risk analysis.

In a statement from the Directorate of Corporate Communications of the NCDMB quoted the management of the Board as saying that at the first stage of the competition, the top 30 proposals will be selected and the teams assigned mentors to guide them towards developing a compelling demo and presentation, while proposals will be reduced to 10 at the second stage, and further reduced to five on the final day of the competition where the winners will be determined.

“The innovators will present their business pitches/demos to corporate venture capitalists to invest, drive innovation, and expand market reach, while helping emerging businesses to grow.

“Prizes will be awarded to the top five winners of the competition in the form of cash, mentorship opportunities, and media coverage, while the top 10 participants will be onboarded into the TIIC at the Nigerian Content Tower for guidance and further development of their innovation to commercialisation”, the NCDMB said.

By Ariwera Ibibo-Howells, Yenagoa

Business

Ikuru Town Issues Start-Up Grants, Packs To Skill Acquisition Graduands

Published

2 days ago

January 2, 2026

The Tide

As parts of efforts to enhance the livelihood of the people in the season of celebration, the Ikuru Town Host Community Development Trust (HCDT), has distributed christmas packages worth about N50m to the people of the trust.

The condiments, including 10kg of rice, vegetable oil, tin tomato, and maggi cubes were distributed to over 2,500 households in Ikuru Town community.

The HCDT also issued start-up grants of N200,000 alongside starter-packs to each of the 13 graduands of its Skill Acquisition Programme.

Speaking to journalists at the Ikuru Town HCDT Community Town Hall meeting and Sharing of Livelihood Support Items programme, in Ikuru Town, Andoni, Rivers State, Monday, the Chairman, Ikuru Town HCDT, Prof. Lysias D Gilbert, said the gesture was the birth of the 3% derivative of the Petroleum Industry Act (PIA) of Its settlors, the Green Energy International Limited and Lekoil (GEIL/LEKOIL JV).

Gilbert who noted with dismay the high rate of poverty in the country opined that some households may be unable to afford the condiments of the season, insisting that the gesture was to fill the gap for such households and individuals.

According to him, the Ikuru Town HCDT is aimed at developing the community and boosting the livelihood of its people.

“Remember, the rate of poverty in Nigeria is high. A lot of people cannot even afford a cup of rice in December like this. We have come to share these condiments to well about 2,500 households. To those who are living on their own in the community including single mothers and widows. This is to put smiles on their faces, giving them hope that the community has not forgotten them”.

Gilbert said that the HCDT, as part of its empowerment programme for the youths of the community, trained 13 youths comprising of males and females in different skills of pipefitting, hairstyling, photography/video editing, fashion designing, mobile phone repair, welding and fabrication and hair cutting.

In his words “we empowered 13 persons. We picked 15 of our youths, took them to PortHarcourt for a period of 12 months.

We rented an apartment for them, one for the boys and another for the ladies, paid them stipends to enable them feed and transport themselves, and trained them in these different skills”.

Out of the 15, 13 of them successfully graduated and some of them have secured jobs with reputable companies based on their acquired skills. We took them from the community, so, today, we have brought them back to the community, to present them as parts of our achievements in 2025″.

While noting that the HCDT had been consistent in the gestures for the past three years, Gilbert urged the beneficiaries to maximise the opportunity for their individual growth and community development.

He further outlined the HCDT’s achievements to include the community legacy water project which he said would be commissioned before the end of the first quarter, renovation and refurbishment of the community’s secondary school and public toilets, employment of six auxiliary teachers to support the teaching staff in the primary and secondary schools, award of bursary to 801 beneficiaries across all educational levels amongst others.

Beneficiaries of the livelihood support and skill acquisition programme lauded the Ikuru Town HCDT for the gestures and called for continuity.

A graduand in fashion designing, Julia Raymond, said “on behalf of the trainees, I say a very big thank you to the Ikuru Town HCDT. They were there for us at every level of our training. We have acquired a lifetime skill that can sustain us with our parents and siblings and it has been beneficial to us especially in this festive period. I can assure the HCDT that we will make good use of the opportunity “.

Earlier, the Okan-Ama of Ikuru Town, HRM King Miller Aaron Ikuru, expressed gratitude for the peace that has prevailed in the community insisting that it has paved the way for the event of the day.

Represented by the Deputy Okan-Ama, Ikuru Town, Sir Chief Micheal Williams Omayi, King Ikuru said “for today, to God be the glory because peace has finally returned to Ikuru Town. I call on everyone for cooperation and understanding so that we can forge ahead to achieve the developmental process in Ikuru Town.

“The HCDT has done very well to boost the skills of the youths. I encourage the graduands to take the skills seriously for their betterment “.

More Vibrant Businesses In 2016- MD

Chidi Enyie

A Por Harcourt based businessman, Chinonye Okoha Esq has said that businesses in Nigeria are likely to prosper in 2026 following the Federal Government’s policy reforms.

Mr. Okoha who stated that while speaking with journalist in Port Harcourt on New Year day, remarked that despite initial hiccups at the beginning of the present administration, the economy had gradually bounced back.

He said he was optimistic that the Renewed Hope Agenda would fix the economy in a short time.

He said that the spiral inflation had ebbed drastically giving way for a economic growth.

Mr. Okoha noted the prices of commodities that soared as a result of fuel subsidy had become more stable in recent times.

He encouraged Nigerians to support the present administration so it could deliver the necessary dividends of democracy.

According to him, it is likely that if President Ahmed Bola Tinunu’s administration is encouraged to achieve its vision for the country, the Nigerian economy will bounce back and the country will be a desired business destination.

He condemned the restiveness in the North and noted that such things were setting the country back.

He pointed out that Nigeria would be a better business destination if the activities of the bandits were halted.

He lauded the present administration for its plan to fix the Nigerian economy.

By: Lady Godknows Ogbulu