Connect with us

News

Don’t Terminate Passport Contract, Reps Warn FG

Published

on

The House of Representatives has warned the Federal Government against terminating a contract signed with a private firm, Iris Smart Technologies Limited, for the production of electronic passport booklets.
According to the House, procuring the equipment capable of putting the latest security features in the Nigerian e-passport will cost the government about N22 billion. The legislative chamber also warned that the production of 10 million booklets by the firm would be stalled.
These are part of the recommendations contained in the report by the House Ad-Hoc Committee to Investigate the Proposed Domestication and Processing of Nigerian International Passports, which the lawmakers considered and adopted at the plenary, yesterday.
In the report, the committee noted that the Iris Smart Technologies Limited Renewal Agreement with the Federal Ministry of Interior of April 2015 clearly stated in Article 4:0 that the duration of the contract shall be for the delivery of an additional 10 million passport booklets.
The committee stated that “time will be of the essence if the contract expressly states it or if there are clauses to show that parties intended time to be of the essence.”
It further stated, “It will be to the legal detriment of the federal government to unilaterally terminate this agreement for any reason until it runs its course, which is the production of 10 million e-passports or the current remainder under the circumstances.
“The Federal Government can go into negotiations in line with Paragraph 4 above with ISTL to explore suitable options of how the e-passport infrastructure can be maintained until the contract is fully performed.
The Central Bank of Nigeria and the Nigerian Security Printing and Minting Plc should be further advised to abide by this opinion in the overall best interest of the Federal Government, in order not to incur unnecessary liability on our lean financial resources through avoidable litigation or other costlier dispute resolution mechanisms.
“Since the current domestication project was initiated by the Nigerian Immigration Service, in conjunction with the Infrastructure Concession Regulatory Commission, and based on the reports and presentations by all the relevant stakeholders, especially the ICRC, the process was fair, equitable, transparent, and followed all international standards. Therefore, the process should be allowed to be concluded.”
The committee added that the current management of the NIS initiated the domestication process, which requires 90 to 180 days to fully implement the process and other processes of the passport, which will solve the issue of scarcity.
It stressed that the forex generated by Iris Technologies and the NIS through the sales of passports in foreign countries “should be unlocked by CBN and allow NIS and Iris Technologies to have access to the revenue component being generated,” to solve the issue of booklet scarcity before the domestication process.
Listing its findings during the probe, the committee explained that an e-passport project is technology based and not a security printing task, as with the Machine-Readable Passport era; that the security printing aspect of an e-passport constitutes only 13 per cent of the various components of an e-passport booklet; and that the domestication of the manufacturing of e-passport booklets does not eliminate the need for foreign exchange and importation of components.
The committee also explained that an e-passport booklet is an active electronic device, as opposed to the old MRP, which is a merely printed booklet; that the chip embedded in the e-passport has a security access module that allows for a ‘handshake’ with and amongst other devices and equipment within the e-passport network; and that the system does not allow the “infiltration” or use of non-prequalified third-party devices or other booklets within the network.
It stated, “The Nigerian Security Printing and Minting Plc is not a technology company; MINT is a security printer and cannot be an e-passport solution provider. Therefore, it requires a technology partner if it must go into the e-passport project.
“There are over N22 billion worth of systems and equipment, both local and international, in this secured e-passport network. Therefore, if a new booklet solution provider is appointed, this technology infrastructure would have to be discarded. This investment would be lost, and a new network must be purchased and implemented at a greater cost to the Federal Government.”
The panel also stated that it is impossible to have two different e-passport projects running concurrently in any country and that to establish a new e-passport solution, it would require a duration of 36 to 48 months for the rollout of the new infrastructure, “with the attendant consequence that no e-passport would be issued both locally and in foreign missions for that period.”
It added that, as a result, “there would be no passport issued and no revenue accruing from the project for the entire duration of the rollout of the new e-passport solution.”

Continue Reading

News

FG Ends Passport Production At Multiple Centres After 62 Years

Published

on

The Nigeria Immigration Service has officially ended passport production at multiple centres, transitioning to a single, centralised system for the first time in 62 years.

Minister of Interior, Dr Olubunmi Tunji-Ojo, disclosed this yesterday while inspecting Nigeria’s new Centralised Passport Personalisation Centre at the NIS Headquarters in Abuja.

He stated that since the establishment of NIS in 1963, Nigeria had never operated a central passport production centre, until now, marking a major reform milestone.

“The project is 100 per cent ready. Nigeria can now be more productive and efficient in delivering passport services,” Tunji-Ojo said.

He explained that old machines could only produce 250 to 300 passports daily, but the new system had a capacity of 4,500 to 5,000 passports every day.

“With this, NIS can now meet daily demands within just four to five hours of operation,” he added, describing it as a game-changer for passport processing in Nigeria.

 “We promised two-week delivery, and we’re now pushing for one week.

“Automation and optimisation are crucial for keeping this promise to Nigerians,” the minister said.

He noted that centralisation, in line with global standards, would improve uniformity and enhance the overall integrity of Nigerian travel documents worldwide.

Tunji-Ojo described the development as a step toward bringing services closer to Nigerians while driving a culture of efficiency and total passport system reform.

He said the centralised production system aligned with President Bola Tinubu’s reform agenda, boosting NIS capacity and changing the narrative for better service delivery.

Continue Reading

News

FAAC Disburses N2.225trn For August, Highest In Nigeria

Published

on

The Federation Account Allocation Committee (FAAC) has disbursed N2.225 trillion as federation revenue for the month of August 2025, the highest ever allocation to the three tiers of government and other statutory recipients.

This marks the second consecutive month that FAAC disbursements have crossed the N2 trillion mark.

The revenue, shared at the August 2025 FAAC meeting in Abuja, was buoyed by increases in oil and gas royalty, value-added tax (VAT), and common external tariff (CET) levies, according to a communiqué issued at the end of the meeting.

Out of the N2.225 trillion total distributable revenue, FAAC said N1,478.593 trillion came from statutory revenue, N672.903 billion from VAT, N32.338 billion from the Electronic Money Transfer Levy (EMTL), and N41.284 billion from Exchange Difference.

The communiqué revealed that gross federation revenue for the month stood at N3.635 trillion. From this amount, N124.839 billion was deducted as cost of collection, while N1,285.845 trillion was set aside for transfers, interventions, refunds, and savings.

From the statutory revenue of N1.478 trillion, the Federal Government received N684.462 billion, State Governments received N347.168 billion, and Local Government Councils received N267.652 billion. A further N179.311 billion (13 per cent of mineral revenue) went to oil-producing states as derivation revenue.

From the distributable VAT revenue of N672.903 billion, the Federal Government received N100.935 billion, the states received N336.452 billion, while the local governments got N235.516 billion.

Of the N32.338 billion shared from EMTL, the Federal Government received N4.851 billion, the States received N16.169 billion, and the Local Governments received N11.318 billion.

From the N41.284 billion exchange difference, the Federal Government received N19.799 billion, the states received N10.042 billion, and the local governments received N7.742 billion, while N3.701 billion (13 per cent of mineral revenue) was shared to the oil-producing states as derivation.

Continue Reading

News

KenPoly Governing Council Decries Inadequate Power Supply, Poor Infrastructure On Campus

Published

on

The Governing Council of Kenule Beeson Saro-Wiwa Polytechnic, Bori, has decried the inadequate power supply and poor state of infrastructural facilities and equipment at the institution.

The Council also appealed to the government, including Non-Governmental Organisations, agencies, as well as well-meaning Rivers people to intervene to restore and sustain the laudable gesture, dreams and aspirations of the founding fathers of the polytechnic.

The Chairman of the newly inaugurated Council, Professor Friday B. Sigalo, made this appeal during a tour of facilities at the  Polytechnic, recently.

Accompanied by members of the team, Prof Sigalo emphasised the position of technology, technical and vocational education in sustainable development.

He noted that with the prospects on ground, and the programmes and activities undertaken in the polytechnic, there is no doubt that the institution would add values to the educational system in our society and foster the desired development, if the existing challenges are jointly tackled.

This was contained in a statement signed by Deputy Registrar, Public Relations, Kenpoly,  Innocent Ogbonda-Nwanwu, and made available to The Tide in Port Harcourt.

The chairman who restated the intention of his team of technocrats to ensure that KenPoly enjoys desirable face-lift, said the Council would deliver on its core mandates, accordingly.

Earlier, the Rector, KenPoly Engr. Dr. Ledum S. Gwarah, commended the appointment of Professor Friday B. Sigalo as Chairman of the KenPoly Governing Council.

He described him and his team as seasoned technocrats and expressed confidence in their ability to succeed.

The Rector pledged the management’s support to the Council to ensure that KenPoly resumes its rightful place in the comity of polytechnics in the country.

Facilities visited by the Governing Council include KenPoly workshops, laboratories, skills acquisition centre, library, hostels and medical centre.

 

Chinedu Wosu

Continue Reading

Trending