Business
Expert Advocates Complete Automation Of Standby Generator
An engineering expert, Engr. Nwachukwu Alloy Iloanwusi, has called for the complete automation of a standby generator.
Engr. Iloanwusi made this known during a paper presentation at the technical section of the Nigerian Society of Engineers (NSE), Port Harcourt Branch monthly general meeting at the NSE Secretariat in Port Harcourt.
According to him, to automate a standby generator would close the gap between the time of public power failure and when the person in charge switches on the standby generator which normally causes harm in the case of life support or operation in the hospitals or intelligence meeting.
The expert stated that control of the operations of a standby generator during power outage is done by activating the prime mover at mains failure and further highlighted definition of concept on a standby generator.
He further said that “when there is a failure of public power supply, the loads are being transferred and returned to mains when power had been restored, thereby shutting down the generator as well as protecting the engine from shortage of lubricant or coolant and in that case pressure and temperature sensors are employed”.
On the load transfer circuit, the expert maintained that the change over circuit has two loads bearing contractors rated 800amp with a common output, but each serving as input for mains and standby generators respectively, recommending the 800amp to calculate load rating.
Engr. Iloanwusi noted that the control circuit has two segments of which one is controlled by mains and the other by standby, pointing out that the segment controlled by mains supplies three phase voltages and neutral to a neutral voltage monitor.
The engineer hinted that the essence of the delay is to ensure that the supply has stabilized while the essence of passing through the normal closed contact of generator contractor is to ensure that the generator contractor is de-energised.
On the engine protection circuit, Engr. Iloanwusi stated that it is made up of a circuit that would cut off the engine at the events of high temperature or low lubricant pressure, adding that it is incorporated into the stopping circuit.
He commended the good work of the present executives and the opportunity given to him during the technical session.
Business
Pipeline Explosion In Abua Odua, LGA Chair Calls For Calm
Business
Fidelity Bank Collaborates YEIDEP To Empower Nigerian Students
Business
NPA Launches Multi-Agency Taskforce To Combat Apapa Traffic Gridlock
-
Rivers5 days ago
Rivers Police Uncovers Firearm Concealed In Loaf Of Bread
-
Niger Delta5 days agoPro-Chancellor Hands Over Okey Onuchuku Peace, Conflict Institute Building
-
News18 hours ago
Alleged Coup Plot: DSS Docks Five For Hiding Sylva’s Whereabouts
-
News18 hours ago
Rivers Court Jails Man Seven Years For Defiling Minor …Directs N5 Million Upkeep For Victim
-
Sports5 days ago
Six Nigerians To Play For NBA Teams
-
Business5 days agoIPMAN Raises Concern Over Delay In Chinese Refinery Deal …Predicts Lower Fuel Prices Through Competition
-
News5 days agoFubara Reaffirms Commitment To Blue Economy, Private Sector Growth …Calls For Protection Of Marine Resources
-
Business5 days ago
Navy Hands Over Five Suspected Stowaways to NIS
