Connect with us

News

I Need Nigerian Made Helicopter BeforeI Handover, Buhari Tells NASENI

Published

on

President Muhammadu Buhari has given a fresh challenge to the National Agency for Science and Engineering Infrastructure (NASENI) and the Air Force Institute of Technology (AFIT) Kaduna to complete work on the ongoing manufacturing of the first Nigerian-made helicopter before the end of his administration.
The Executive Vice Chairman/Chief Executive of Engr. Prof. Mohammed Sani Haruna disclosed this at AFIT Kaduna when he led a team of NASENI staff on a visit to the site of NASENI’s new Aeronautics and Air Vehicle Development Institute(AAVDI) located in AFIT which houses the Made in Nigeria Helicopter project.
According to Haruna, Buhari looked forward to a formal launch of the Helicopter before May 29 2023 which marks the end of the present administration.
The NASENI executive vice chairman during a meeting with the newly appointed Commandant of AFIT, Air Vice Marshal Paul Olugbeji Jemitola, yesterday in Kaduna, disclosed that Buhari was particularly interested in the completion of works on the Made in Nigeria Helicopter during NASENI quarterly briefing of Mr President by the EVC/CE on the activities of the agency, last week.
He said the President specifically asked about the ongoing works on the project, stating that Buhari’s enquiry on the Helicopter project was an indication that the President was keen on the need to complete work on the manufacturing of the helicopter.
Responding the Commandant of AFIT, Air Vice Marshal Paul Olugbeji Jemitola, said that the order from Mr.President “is a task that must be carried out on the completion of work on the project.”
According to him, “no stone will be left unturned in order to accomplish the work so that the desire of Mr President on the Helicopter Project will be realized”.
He said, “NASENI has been instrumental to the development of many facilities in AFIT in the past while commending the proactiveness and the dynamism with which NASENI now does its work”.
He said, “AFIT welcomes the Challenge by Mr President, the existing MoU between NASENI and AFIT, and the significance of the project, all combined to make the presidential challenge worthwhile”.
Explaining further on the significance of AAVDI as NASENI emerging institute, the EVC/CE disclosed that “the Aeronautics and Air Vehicle Equipment Development Institute located at AFIT Kaduna is one of the new institutes of NASENI approved by Buhari. The institute has the mandate to research and develop spare parts, components and systems of Aeronautics and Air Vehicle Technologies. It is mandated to produce both passenger and military aircraft through backward integration. It is the Centre of NASENI Helicopter project assembly and the first Made in Nigeria Helicopter now being relocated to AAVDI.”
The visit was for site take over, design and to strategize the commencement of construction work to fast track the take-off of the project.
According to the NASENI plan, the EVC disclosed “technologies prospecting for domestication from our counterpart agencies across the world for aircraft manufacturing will have pilots’ plants for realisation here in Kaduna and the facilities will be designed to provide machineries, equipment, laboratories and workshops to be shared with AFIT and Nigerian Air Force”
On the second project that was inspected by the EVC/CE, he said that the Federal Government has a plan to develop industrial parks for the automotive sector in three zones of the country: Nnewi-Anambra State, Osogbo in Osun State and Igabi, Kaduna State.
“The project initiative is in line with the concept of the Federal Ministry of Industry, Trade and Investment which initially proposed establishing the Automotive Supplier Industrial Park (ASIP).
“This concept agrees with the mandate of NASENI for the provision and development of primary and intermediate capital projects required for machine and equipment design, fabrication, and mass production, in order to provide the enabling environment for the sustainable industrialization of the country”.
According to Haruna, the project intended to unlock the opportunities in the auto sector as well as potential in the manufacturing industry with a view of creating employment, and skilled labour in this region and sub-Saharan Africa.
It is expected to earn the country foreign exchange and stop the importation of vehicle spare parts.
Major vehicle manufacturers from different countries have indicated interest to operate from this facility.
It also intended to provide the Nigerian Army Vehicle Manufacturing Company with the necessary support in the production of Armoured Vehicles.
“Once fully taken up and equipped, the automotive park will be self-sustaining and also becomes a source of revenue to the government”.
Amongst top management staff of AFIT, who received the EVC/CE and his team and conducted the inspection of AFIT facilities include the Provost of AFIT, Prof Mohammed Dauda, the Registrar, Air Commodore Oluokun, the Deans, Directors and Heads of Departments.

Continue Reading

News

FG Targets Production Of Locally Made Vehicles By Dec

Published

on

The Minister of Industry, Trade and Investment, Dr Doris Uzoka-Anite, has affirmed that Nigeria now has the capacity and materials to manufacture Made-In-Nigeria cars for local use and export.
With the enabling environment being provided by the government, she said manufacturers should be held responsible if the cars are not rolling out by December 2024.
Currently, Nigeria produces less than 10 per cent of the vehicles used in the country.
Last year, Nigeria’s vehicle assembling industry, estimated to be worth around N302billion, tanked to a new low due to increasing production costs and weakened demand for locally assembled automobiles.
According to the Manufacturers CEOs Confidence Index, activities of motor vehicles and miscellaneous assembly deteriorated further below the benchmark (50 points) from 48.6 to 46.7 points.
But speaking at the Automotive Component Manufacturers meeting in Abuja, she noted that the automobile industry is faced with both challenges and opportunities.
A statement issued last Friday by the Director of Information and Public Relations, Adebayo Thomas, said, “In a significant move aimed at fostering sustainable growth and development in Nigeria’s automobile industry, the Federal Government has issued a clarion call to all stakeholders, including manufacturers, dealers, regulatory bodies, and other players in the automobile ecosystem.
“The call comes as part of a broader strategy to enhance the sector’s contribution to the nation’s economy.”
Encouraging the stakeholders to key into the Nigerian Automotive Development Policy, the Minister said, “As far as we are concerned, the auto industry is now set to go.
“We are counting on all stakeholders to make that happen. If we do not produce made-in-Nigeria cars before the end of this year (December), it will be your fault, because I am sitting down here giving you all the assurances that this administration has created the enabling environment to make sure that the auto policy kicks off.”
Anite emphasised the need for collaboration among manufacturers, dealers, regulatory bodies, and other players in the automobile ecosystem, saying by working together, they can address challenges, streamline processes, and drive innovation.
She also urged stakeholders to maintain high-quality standards across the board, including vehicle manufacturing, safety features, emissions control, and after-sales services.
Stringent adherence to quality, she said, will boost consumer confidence and attract investment.
The minister assured all that the government would continue to encourage increased investment in research and development, adding that, innovations in electric vehicles, fuel efficiency, and alternative energy sources are critical for long-term sustainability.
On local content, she also emphasised the importance of promoting local content by sourcing materials and components locally.
By doing this, she said, the sector can create jobs, reduce import dependency, and contribute to economic diversification
In his introductory comments, the ministry’s Permanent Secretary, Nura Rimi, emphasised the significance of team action and shared vision as outlined in the Nigerian Automotive Development Policy.
He also urged stakeholders that the country “will overcome obstacles and unleash the full potential of Nigeria’s automotive component sector.”
He encouraged NADDC and other stakeholders to use the chance to form alliances, explore new areas of collaboration, and devise ways to catapult the automotive components manufacturing industry to new heights of success.
The statement added, “The government’s charge underscores the pivotal role stakeholders play in shaping its trajectory. Their commitment to sustainable practices will drive Nigeria’s automotive sector towards a brighter and more prosperous future.
“Environmental Responsibility: Stakeholders are reminded of their environmental responsibilities. Sustainable practices, recycling, and eco-friendly manufacturing processes are essential for a greener future.”

Continue Reading

News

Waive Tax On Electronic Imports, Women Engineers Appeal To Tinubu

Published

on

The Association of Professional Women Engineers of Nigeria (APWEN), Lagos Chapter, has called on President Bola Tinubu to exempt the importation of electronic components from taxation for inventive engineers.
Chairman of APWEN, Ms Atinuke Owolabi, said this a in statement yesterday in Lagos, in commenration of the 2024 World Creativity and Innovation Day, with the theme: “Step Out and Innovate”.
The Tide source reports that World Creativity and Innovation Day is a global UN Day, celebrated on April 21, to raise awareness about the importance of creativity and innovation in problem solving.
This is with respect to advancing the United Nations’ sustainable development goals, also known as the global goal.
Owolabi explained that such a measure would significantly enhance technological progress, support local innovators, and elevate Nigeria as a leading hub for innovation globally.
She stated that in a world marked by dynamic challenges and unprecedented opportunities, creativity and innovation stand as the driving forces behind progress and transformation.
According to her, women engineers recognise the critical role that innovation plays in shaping our societies and driving sustainable development.
”On this occasion, we affirm our commitment to fostering a culture of creativity and innovation within our organisation and the broader engineering community.
”Together, let us step out, innovate, and inspire the next generation of women engineers to reach even greater heights of achievement and impact.
”We believe that by stepping out of our comfort zones and embracing new ideas, technologies, and approaches, we can unlock innovative solutions to the complex challenges facing our world today,” she said.
According to her, the theme: ‘step out and innovate’, serves as a call to action for women engineers everywhere to break barriers, challenge conventions.
She noted that it would also pioneer groundbreaking solutions that would propel them toward a brighter and more sustainable future.
Owolabi disclosed that in celebration of the World Creativity Day, APWEN Lagos had inaugurated an artificial intelligence club tailored for female engineering students and young engineers.
She said that the proactive initiative aimed to inspire and equip young engineers with cutting-edge technological insights.
Th chairman said, “Additionally, we already have a 200-capacity hall to set up a resource, technology, and innovation hub to empower women and girls in engineering.
”This endeavour serves as a catalyst for encouraging aspiring female engineers to embrace innovation and stay abreast of emerging trends in the field.
”APWEN Lagos stands united in its dedication to promoting diversity, inclusivity, and excellence in engineering.
“We encourage all female engineers to seize this opportunity to unleash their creativity, explore new frontiers, and make an indelible mark on the world.”

Continue Reading

News

Pan-Igbo Group Hails Dangote Group For Reducing Diesel Price

Published

on

A pan-Igbo group, Ndigbo Unity Forum (NUF), has commended the Chairman of the Dangote Group, Alhaji Aliko Dangote, and his management for reducing the price of diesel from N1,600 to N,1000 per litre.
The Tide’s source reports that diesel is the major fuel used by heavy duty vehicles and generating sets to transport goods as well as run industries across the country.
The President of NUF, Mr Augustine Chukwudum, told The Tide’s source in Enugu, yesterday, that Dangote’s timely response to suffering masses of Nigerians, going through hell to get a meal a day, “is highly commendable”.
According to Chukwudum, Nigerians need to appreciate the patriotism of Dangote since what he has done will go a long way in reducing prices of goods, especially food stuff which has gone out of the reach of the poor.
He called on Nigerians, who wish and pray always for the betterment of the country, to appreciate and thank God for answering their prayer through Dangote’s move.
“It is clear that if Dangote Refinery starts fully and gets all the crude oil needed from Nigeria, the prices of petrol, kerosene and diesel will further reduce.
“We commend President Bola Tinubu for being a listening President and supporting the Dangote Group on our crude oil needs.
“We appeal to Tinubu to encourage Dangote by providing the company with crude oil at a reduced rate as we have been demanding,” he said.
Chukwudum said that this move and subsequent further reduction, would bring industries in comatose back to life, jobs created for unemployed youths and reduction in crime as well.
“We call on governors of oil-producing Anambra, Imo and Abia States to bring investors, who shall build refineries in each of the states to refine thousands of barrels of crude in commercial quantities,” he said.

Continue Reading

Trending